HyperFlight 2/4 Pushrod Set
Description
This pushrod set consists of a 2 mm carbon rod running in a 4 mm outside diameter Low friction rigid plastic tube. This excellent quality pushrod set is long and strong enough for many types of models, and for a multitude of engineering uses.
This type of inner rod and outer tube is sometimes called a Bowden Cable. It is important that the ends of the 4 mm outer tube are secured to the structure. It is even better if the complete outer tube run is glued in place. This can be achieved in tailbooms by temporarily fitting a piano wire inner rod and clamping the tube to the boom with magnets. Then liberally dribble in CA unto the upended boom, until the CA appears at the other end of the run.
Sold singly - one inner rod and one outer tube per set.
If the pizza box option is shown these can be sent by coiling into a pizza type box, or they can be kept straight and sent in a 1.5 m long postal tube at extra cost. If sent coiled they will straighten out well. Please remove from the pizza box with care!
These can be only be sent in a 1.5m long postal tube. This increases the shipping cost but is unavoidable as the 2 mm rod is too rigid to be coiled into a pizza box.
This type of inner rod and outer tube is sometimes called a Bowden Cable. It is important that the ends of the 4 mm outer tube are secured to the structure. It is even better if the complete outer tube run is glued in place. This can be achieved in tailbooms by temporarily fitting a piano wire inner rod and clamping the tube to the boom with magnets. Then liberally dribble in CA unto the upended boom, until the CA appears at the other end of the run.
Sold singly - one inner rod and one outer tube per set.
| HyperFlight 2/4 Pushrod Set | ||
|---|---|---|
| Inner and Outer length | 1.5 m | |
| Inner rod diameter | 2 mm | |
| Rod material | Pulltruded carbon fibre rod | |
| Outer tube diameter | 4 mm | |
| Outer tube material | Low friction rigid plastic | |
| Unit weight of rod and tube | 11 g/m | |
| Weight of 1.5m rod and tube | 16.5 g | |
| Comparative max force | 40 Kg | |
If the pizza box option is shown these can be sent by coiling into a pizza type box, or they can be kept straight and sent in a 1.5 m long postal tube at extra cost. If sent coiled they will straighten out well. Please remove from the pizza box with care!
These can be only be sent in a 1.5m long postal tube. This increases the shipping cost but is unavoidable as the 2 mm rod is too rigid to be coiled into a pizza box.
Reviews 4
Ken Coble
UK
Push rod
Good product used these pushrods on all my F3F models super smooth strong and fit 2mm ends, perfect for a slim fuselage. 5 Star service from Neil once again
juan jose Boullosa Garcia
UK
suve y preciso
Este de 2 mm lo instalo en el mando de elevador, con la longitud de 1,5m da de sobra para veleros de 4m ,yo los uso en F5J
