10mm Carbon Tube (9mm ID)
Description
Select the required length using the radio buttons below the price.
| 10.0 mm Carbon Fiber Tube Specification | |
|---|---|
| Outside diameter | 10.0 mm |
| Inside diameter | 9.0 mm |
| Weight per m | 24.0 g per meter |
| Length | See the options below the price |
| Structural material | T300 carbon fibers |
| Matrix | Epoxy resin |
| Carbon content | Approx. 60% |
| Youngs Modulus | 230 GPa |
| Ultimate tensile strength | 1600-2300 mPa |
| Fibre density | 1.4 - 1.8 g/cm3 |
| Resin glass transition Tg | 170º C |
| Packing type | Rigid-usually sent in a postal tube |
Due to dimensional variability our 9.0 mm carbon rods and 9.0 mm OD carbon tubes will probably not fit in these tubes without material being removed.
Postal Charges
England, Wales & Scottish Lowlands
75 cm items will be sent in a postal tube by Royal Mail. 150 cm items will be sent in a long postal tube by courier - this increases the postal cost.
UK Islands, NI & Scottish Highlands
All items will be cut down to 75 cm length and sent by Royal Mail unless this postal charge is added to the basket.
Europe and Rest of the World
75 cm long items will be sent by Airmail post at low cost. Longer items will be sent by courier - this will increase the shipping charge considerably.
If even numbers of 75 cm long items are ordered we reserve the right to send half the number of 150 cm items to simplify packing.
Reviews 7
Only a small order, carbon tubes and servo covers. However the items were very well packed and delivered in the time stated. Would happily buy from Hyperflight again.
Hyperflight are in my top three internet company's for top quality goods and excellent next day service
Top quality, very fast seller, serious people. Thanks!!
Great delivery and a good price, but in comparison with some other tube that I was replacing as a result of a crash it was a bit lacking. It does crush quite easily along the tubes length. However I have had it in my quad for a few days now and it seems to be performing well. Would I buy it again ?
The jury is out on that one.
Good quality but with 0.5mm wall thickness should not be used where there is much crushing force.
