| MKS HV6100 Servo Specifications | ||
|---|---|---|
| Body dimensions | 22.5 mm wide x 10.0 mm thick x 23.5 mm high | 0.89" wide x 0.39" thick x 0.93" high |
| Max dimensions | 31.0 mm wide x 10.0 mm thick x 24.5 mm high | 1.22" wide x 0.39" thick x 0.96" high |
| Stall torque (6V) | 2.6 Kg.cm | 36 oz.in |
| Stall torque (7.4V) | 3 Kg.cm | 42 oz.in |
| Stall torque (8.2V) | 3.4 Kg.cm | 47 oz.in |
| Weight | 9.8 g | 0.35 oz |
| Lead length | 18 cm | 7.1 in |
| Operating speed (6V) | 0.14 sec/60° | |
| Operating speed (7.4V) | 0.11 sec/60° | |
| Operating speed (8.2V) | 0.1 sec/60° | |
| Operating voltage | 6V to 8.2V | |
| Operating temperature | -10 to 50 °C | |
| Bearings | 2 jewel bearings + 1 bronze bush | |
| Gear material | Aluminium-magnesium alloy | |
| Case material | Nylon | |
| Motor type | Coreless DC motor | |
| Working frequency | 333 Hz | |
| Dead band/resolution | 1 µs | |
| Pulse width for ± 60º | µs | |
| Digital | Yes | |
| Programmable | No | |
| Position feedback | Direct drive potentiometer | |
| Supplied accessories | 2 plastic output arms, 2 arm retaining screws, 2 mounting screws | |
| Optional accessories | Ply frame for MKS DS6100, Frame with bearing for the MKS DS6100, Integrated Drive System/Mono for MKS DS6100, MKS Plastic Servo Output Arms, MKS Heavy Duty Plastic, MKS Short Metal Servo Output, MKS Long Metal Servo Output Arms, Replacement Gear Set for M | |
My go to servo for my F5j models.Needless to say they’re Ultima2’s.
I ordered the low voltage version by mistake. Neil was kind to allow me to return them for a full refund. Ordered the HV version which are great servos.
These servos are quite simply the best you can buy for this size, and their available in 5volt and 8.4volt, I would not trust anything else.
HV6100 servo great servo, and excellent service as usual from Hyperflight
Great servo. Fast delivery.
Always an easy transaction at Hyperflight.
Great servos, great service as expected.
One of my favourite servos. Small yet powerful with no backlash.
I am quite the fan. My preferred servo due to size, precision and resolution.
I am using them in all my F5J gliders. In servo frames in the wing and mounting trays in the fuse. They have been reliable as to centering and longevity. I use them on flaps but if you drag a flap on landing they will fail. HV6130 is a better choice according to MKS but more expensive. I look at it like a race car and tires. If a problem pull it out and put in a new one. They are not that expensive.
Prompt shipping as always.
Servos working on both 4 cell NiMh and 2S Li-Ion.
Plug and play for non HV.
A thank you to Neil for tolerating the fact I ordered the wrong servos, sorting out the credit for the returned servos and sending on the correct servos......all in under a week.
Great servos for F5J sailplanes.
Great service from Neil.
Highly recommend both.
Best servo for light glider and fast service from Neil. Thank you
Best servo for light glider and fast service from Neil. Thank you
Perfect servo for F5J gliders, fast and powerful enough at 5.5 V. Is a standard for ail, elevator and rudder.
Great for tight space, precise and good quality.
Great service and communication from Neil.
Highly recommends servos and service!
Great servos for light & up to balasted F5J sailplanes.
Great service from Neil.
Highly recommend both.
Excellent service as always and am amazed with the power from these little servoes, just a shame the raised block on the top can get in the way of control horns on some installations.
Purchased four of these for my Xplorer F5J, for the ailerons, rudder and elevator and they have performed beyond expectations. Only issue is noise :-) These are noisy servos, probably the noisiest I have ever heard, but they centre perfectly and are an excellent choice for high performance gilders.
I would highly recommend these.
I've been a 6100 fan for a yr now, (tried the KST substitute first for a while, not happy). These are light, tough, and nicely all boxed in (i'm not a fan of micro servos that have wires exposed). Only minor complaint is that for me, the HV version of the 6100 gives off ,periodically, a static noise, never experienced that with the standard 6100, I'm using these with a LiFe battery for the receiver.
Very robuust and powerfull servo.
Use it on flaps for f5j
Very nice and precise servo's
Quicker than the non hv ds6100 servo's
No slop at all! Very happy!
The service was excellent and the shipping quite fast. The only negative item was, that your e- mails were nearly unreadable.
Best regards- Franz Bullmann
This combination should fit into just about any tight F3X fuselage. It's an overkill for what I'm doing, converting an old F3J model to F5J for a practice hack, however the LDS mount set is the only way I can see to make it happen in the fuselage space available.
Bought to replace a faulty unit, but a nice, quick, strong servo.
Excellent little servo. Fast, powerful and accurate. Only slight criticism is that the raised casing behind the output arm interferes with the pushrods when trying to install two diagonally in a narrow F5J fuz. I had to install them in tandem with some complicated mounting arrangements.
These really are a great little servo - tuck in virtually anywhere.
and if your running a Rx that can handle higher volt supply and you are running these with long cables there just the job
447821351341
shoppingtest@itpartnership.com
Contact Form
