M2 Stainless Steel Pushrod Ends for 2mm Rods (2)
Description
Note two SS pushrod ends only are supplied, rods and clevises must be purchased separately. Suitable for 1.8 mm to 2 mm carbon or steel rods. Attach by coating the pushrod in epoxy or thick CA. The hole is to allow the air and excess glue to escape. Degrease before gluing.
| Stainless Steel 2mm Long Pushrod End Specification | |
|---|---|
| Pushrod hole size | 2 mm |
| Pushrod tube length | 10 mm |
| Threaded portion length | 11.5 mm |
| Overall length | 26 mm |
| Thread size | M2 |
| Weight (each) | 0.70 g |
Reviews 9
Whether ordering a full model or just a few bits of hardware Hyperflight always delivers the goods well packaged and on time.
I really appreciate their range of quality hardware. Control horns, ball links, folding props etc etc. Good quality hardware is increasingly difficult to find these days.
Great solution for making carbon push rods. I epoxy these to the end of a carbon rod. Finally coating the carbon rod and aluminium end with epoxy and heat shrink the assembly before the epoxy sets. This makes a strong end set up that will stand most if not all stresses.
Very nicely made. Perfect for carbon rod. Fast delivery
vqn perfectos con l varilla de carbono de 2mm, los agujeros laterales dejan salir el aire y el epoxi ,quedan perfectos
Very nicely made. Fits my 2mm CF pushrod perfectly for glue joint. Threads are well formed. I also like the small glue hole. Well thought out design
Beautifully made parts that do exactly what they claim. My only complaint is that their threaded sections are too short to allow much adjustment.
Install with confidence that they won't shear at the start of the thread.
Great Quality
