ADH C20 / MM1908-2050 2050 RPM/V 26g Front Mount Outrunner
Description
It can be pushed to about 140W on 3S LiPo batteries or 100W in 2S LiPos.
| AEO RC MM1908-2050 / C20 Specifications | |
|---|---|
| Weight | 26g |
| Dimension | 22 mm long by 23 mm diameter |
| Voltage | 7.2V~11.1v, 2S~3s Lipo |
| Kv | 2050 rpm/V |
| Shaft | 3mm diameter |
| Shaft length | 9.5mm |
| Max Power | 14A or 140W |
| Thrust | about 560g on a 7x3.5 prop on a 3S LiPo |
| Thrust | about 490g on a 8x4 prop 2S LiPo |
| Mounting | On the same side to the prop shaft. |
| 2S Prop | 6x3, 6x4, 7x3.5, 7x4 |
| 3S Prop | 5x4, 6x3 |
Reviews 5
Brilliant little motor for elec DLG. The service, as usual was excellent, next day here in the UK. Thank Neil.
Just done an elec conversation on my Longshot DLG.
ADH C20 / MM1908-2050 2050 RPM/V 26g Front Mount Outrunner
28amp BLHELI-32 ESC with 3A SBEC
CN-SPINNER-25-3 CN Models 25mm Spinner for 3mm shaft
OA 6x4 Folding prop blades (2mm hinge pin)
What an excellent combination. Goes up like a rocket with a 2s Lipo.
Brillant, next day service from Neil, can't recomend Hyperflight enough!
A neat little motor that I needed for an EPP flying wing. Works fine and can be changed from front to rear mounting.
This is a really well made brushless motor that I use for my scratch built 1.3m glider (250gr). I use it with a 7x3.5 prop and 3s 450mah. Heaps of power for this size of engine and no problems with overheating at all. I use a 15A brushless controller.







