Kite 1.5m DLG

I carefully reviewed the attached instruction and Armsoar build video before building. I successfully avoid the mistake mentioned in the video but quickly find that it is impossible to install the aileron pushrod for the right wing follow the instruction. The reason is three-fold: 1. I The servos have to be located very forward otherwise the aileron pushrods will be way too high; however, this will make the CG too much forward. 2. The instruction shows the last servo arm is backward which is wrong; you need to put it forward to get more space. 3 The instruction mentioned 10mm from the servo to the fuselage edges; I find it is way too much as the left wing pushrod will touch the right wing servo case. This is my third DLGs and it has the worst fit!!

Nice quality! super fast delivery!

Sehr gute Vorfertigung, Passgenauigkeit und Qualität des Modell. Leicht und Stabil. Fliegt perfekt. Schneller Versand und super Service. Bin rundum zufrieden. Vielen Dank.

I bought the two-part wing version. Delivery by Neil was very quick.
Very pleased with the performance using the recommended settings.
With 2 KST X08's + 2 X06's there's *just* enough room for a G-RX6 receiver and 250 mAH 2S LiPo battery - an ideal combo but positioning the components is critical to get it all to fit. (With four X08's I doubt it would fit.)
I followed the assembly guide and also ArmSoar's videos. Note that the second video corrects a couple of critical errors in the first. They are in error with regard to the way the bent-wire pushrod ends connect to the aileron servos, page 16 of the assembly guide shows the right way. The hidden aileron linkage is ingenious but it's worth spending time to follow the assembly guide precisely. My Kite weights 228 g dry, and 260 g with the supplied quick-loading ballast.
I'm using a Radiomaster Zorro transmitter, loaded with DLG v2.1 template from OpenTX Clinic. Overall, I'm delighted with the finished model.