| KST DS113MG Servo Specifications | ||
|---|---|---|
| Body dimensions | 24.0 mm wide x 12.0 mm thick x 22.0 mm high | 0.94" wide x 0.47" thick x 0.87" high |
| Max dimensions | 32.5 mm wide x 12.0 mm thick x 33.5 mm high | 1.28" wide x 0.47" thick x 1.32" high |
| Stall torque (4.8V) | 1.8 Kg.cm | 25 oz.in |
| Stall torque (6V) | 2.2 Kg.cm | 31 oz.in |
| Stall torque (6V) | 2.2 Kg.cm | 31 oz.in |
| Weight | 12 g | 0.42 oz |
| Lead length | 10 cm | 3.9 in |
| Operating speed (4.8V) | 0.14 sec/60° | |
| Operating speed (6V) | 0.11 sec/60° | |
| Operating speed (6V) | 0.11 sec/60° | |
| Operating voltage | 4.8V to 6V | |
| Operating temperature | -10 to 55 °C | |
| Bearings | 1 Ball bearing | |
| Gear material | Aluminium alloy / copper-bronze alloy | |
| Case material | Strong plastic | |
| Motor type | Cored DC motor | |
| Working frequency | 333 Hz | |
| Dead band/resolution | µs | |
| Pulse width for ± 60º | 800-2200 µs | |
| Digital | Yes | |
| Programmable | No | |
| Position feedback | Potentiometer | |
| Supplied accessories | 3 plastic output arms, 1 arm retaining screw, 2 mounting screws | |
| Optional accessories | KST Plastic Servo Arm Set | |
Great value from KST. Very smooth, accurate servos with adequate power for most soaring models.
Nice little budget servo which went in one of my cheaper slopers, does the job perfectly with no issues.
Fastest delivery on planet Earth from Hyperflight.
3 out of 4 have failed in a wot 4 foam e within 6 months, so not very impressed at all.
Excellent service and servo meets all my expectations.
Have always bought KSTs as they are great spec & value and very reliable. A cheap solution to a 2 servo a/c
Excellent little servo for lightweight gliders. Half the price of HiTec equivalent. Pulls over 2 kg. Metal geared. Eleven quid each ! What's not to like ? Richard O. Wales UK.
Great value servo. Very smooth in operation compared to the Multiplex ones it replaced which are more than twice the price.
I moved over to only using KSTs a few years ago. Small and light but good power and quality build. Great value. Neil’s speed of delivery is always 1st class
Half the price of the carbonite hitec equivalent, this is a great little metal geared servo, in the tail of my funray they fit perfectly, well pleased.
good servo for that price, but it is not good for professional use. Servo arm is not tight to the crank
Good little servo, working well in a quick foamy aerobatic model. Excellent service as usual from Hyperflight.
Average or perhaps even sub-average servo.
Centering: not too good.
Slop in gear train: Yes!
However it seems that it is at least as strong as the specs sa, and it runs smoothly.
Reasonably priced, fairly fast, they seem to work fine, and have no slop at all, though I would hope not with a brand new servo. The travel however, feels a bit notchy, which doesn't inspire me with confidence for the long term.
Excellent value I would recommend them highly Top notch service
447821351341
shoppingtest@itpartnership.com
Contact Form
