0.96mm ID Etched PTFE (19 AWG Bondable PTFE) Pushrod Outer Tube
Description
Low friction 0.96 mm ID PTFE tube suitable for pushrod outers on discus launched glider and other small models. Also suitable for a large range of engineering and industrial uses.
This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.
Can be stretched to 2 times the original length to reduce the weight per meter, and tune the inside diameter to be a perfect fit for the inner pushrod. Sold by the meter. Enter a quantity of 3 for a 3m roll.
Maximum 30m per order please. For more please consider purchasing a complete roll.
This tubing is specially etched on the outside, making it easily bondable using many adhesives, thin CA being probably the best. Provides the lightest, easiest, most friction-free pushrod installations possible.
Can be stretched to 2 times the original length to reduce the weight per meter, and tune the inside diameter to be a perfect fit for the inner pushrod. Sold by the meter. Enter a quantity of 3 for a 3m roll.
| 19L Etched PTFE Tube Specification | ||
|---|---|---|
| Inside diameter | 0.96 mm | 0.038 in |
| Wall thickness | 0.15 mm | 0.006 in |
| Outside diameter | 1.26 mm | 0.050 in |
| Suggested inner | 0.8mm Carbon Rod | 22 SWG Piano or SS wire |
| US size | 19 AWG L type (Lightweight) | |
| Weight per m | 1.1 g per meter | |
Maximum 30m per order please. For more please consider purchasing a complete roll.
