M2 Stainless Steel Pushrod Ends for 1.5mm Rods (2)
Description
A pair of high quality stainless steel pushrod ends with M2 threads cut at one end and a tube to take a 1.5mm or smaller carbon or metal pushrod.
Note two SS pushrod ends only are supplied, rods and clevises must be purchased separately. Suitable for 1.4 mm to 1.5 mm carbon or steel rods. Attach by coating the pushrod in epoxy or thick CA. The hole is to allow the air and excess glue to escape. Degrease before gluing.
Note two SS pushrod ends only are supplied, rods and clevises must be purchased separately. Suitable for 1.4 mm to 1.5 mm carbon or steel rods. Attach by coating the pushrod in epoxy or thick CA. The hole is to allow the air and excess glue to escape. Degrease before gluing.
| Stainless Steel 1.5mm Long Pushrod End Specification | |
|---|---|
| Pushrod hole size | 1.5 mm |
| Pushrod tube length | 10 mm |
| Threaded portion length | 11.5 mm |
| Overall length | 26 mm |
| Thread size | M2 |
| Weight (each) | 0.70 g |
Reviews 6
Kev
UK
M2 stainless steel pushrod ends
1.5ml pushrod ends perfect fit for 1.5ml carbon pushrods little bit of epoxy and solid.
Fabby service quick postage
